SSpev

I wish I could remember. They are not the brands you see now days. but they used to be a name brand. It may come to me.:facepalm

I have rollers under stock valve covers no drippers. If you need more room glue 2 gaskets together.

I just started a conversation.

I'm very interested. I see one head has screw in studs and the other does not. Bought separately? have the ports been messed with?

:yup:yup I had one for sale at $100 but it need derusted and turned.

anyone ever try milling the top off a small port intake then adding on a dual quad top?

Sometimes I think the 379s get a bad rap, when they are perfectly fine on a stock-ish 348, and they keep the compression up a bit over...

What is this car going to be used for? Driving the living $hit out of it! :woohoo How serious are you about making it plant? At the...

Resurrecting this as I now have the problem. Just put in an eaton limited slip with 3.55 gears in the 64. Dump the clutch and WHEEL...

With all this under sizing and no one has said anything about the strength. All this cutting is reducing the overlap between the main...

That how my grandpa taught me to do it. :good any time I don't have one.