Ishiftem

And opec can do it again. We make more and they flood the market to drive the price down till we have to shut oil production because...

Didn’t mean to ruffle anyone’s feathers here, just wanted to hear other racers opinions on the use of this electronic programable...

Doesn’t bother me. It just makes it that much sweeter for me if I beat you with my 4 gear! :poke:D

Sure do. But I still drive the car. A data logger does nothing automatically for the driver or tuning VS just holding the steering wheel...

Back then, it may have been to only new stroker crank available without weding, which was what big end suppliers did back then. Now...

Yes back in the early days of stroker kits, welded cranks and boxed stock rods were the only game in town, MT was one of the pioneers of...

I would’ve thought that the stock 409 water pump installed height would be the same as the Z 11 they both used the same idler pulley...

It’s my experience and observation that vintage speed parts that are internal like cranks, rods, pistons etc. don’t bring big money like...

I would add rtv.

M/T had both forged and cast cranks for different applications. I believe most were cast and I agree with Murphdog that it is likely...

725

CP made them to my specs.

New pistons are here and finally got what I wanted. These should be very stable in the bore compared to the old ones. They made all the...

Once upon a time I purchased some SBC/W timing cover seals that relocated the sealing lip to avoid the groove in a damper snout. See...

Well if you have a groove in the balancer you can just tap the seal in a little.