1937 Chevy Coupe build
- Thread starter Simps37
- Start date
Ok Boys……she is back in…..tomorrow I will button up the remaining items and see if she will move under her own power…..
View attachment 132387
View attachment 132387
You need to put the video on you tube then copy the link and paste here.
How hard to put on u tube???
Not that hard, you do need to start an account with them.
Smart move.
Save your jewels ,never know when you might need them.
All under floor fuel delivery is complete ending with the bulkhead fitting with blue tape…..almost finished with next area…..had to figure out a “cap” to close off back half of floor (next to light)….
One more cap and the rest should be easier!!!!!at least it will be flat!
I may not build pretty floors….but if a Sherman tank needs floors then I’m your guy!
One more cap and the rest should be easier!!!!!at least it will be flat!
I may not build pretty floors….but if a Sherman tank needs floors then I’m your guy!
Attachments
Looks good from here 
Good morning !
Just rolling it up at 1:00am Sunday morning….had the radio rocking and got lots done.
Fuel system is complete (except for finishing running the vent hose…ran outta fuel line).
Main hot battery cable ran from trunk to starter….alternator positive charge cable ran with a 125a fuse mounted next to battery.
Battery, main power shut off switch, ground cables to frame and body at back of car and new ground strap from frame to engine block and a strap to body in front…can never have too many grounds.
The most nerve racking job was cutting a hole for my fancy fuel fill cap….. but it worked out great…..measured 10 times at least……some people don’t care for it…..tooooooo bad!!!!…..little differences give it character!
Just rolling it up at 1:00am Sunday morning….had the radio rocking and got lots done.
Fuel system is complete (except for finishing running the vent hose…ran outta fuel line).
Main hot battery cable ran from trunk to starter….alternator positive charge cable ran with a 125a fuse mounted next to battery.
Battery, main power shut off switch, ground cables to frame and body at back of car and new ground strap from frame to engine block and a strap to body in front…can never have too many grounds.
The most nerve racking job was cutting a hole for my fancy fuel fill cap….. but it worked out great…..measured 10 times at least……some people don’t care for it…..tooooooo bad!!!!…..little differences give it character!