63impalass409

I would say as long as it is at least making it all the way through the bushing, it should be good to go.

Just wondering... I bought a driveshaft from show-cars for a M-20 4speed and I have about 1-1/2" clearance between them. Is this ok? I...

Thought it was just crud on my front yoke. After cleaning it, well... welded up. Thanks buddy, to whomever did it.

Bob, unless a car is to be registered for street use a vin. # is not necessary!

Hello, just picked up a 63 biscayne with a bunch of cool work already done. New driveline New 9 inch Ford rear end. Complete Hotchkiss...

Called Delta Cams today to get an update on the “mystery cam”. This is what they said. Flat Tappet Experimental “Cheater Cam”. .556...

Bill, I'm in Modesto and I have used that shop a few times, I worked in Turlock for many years. The first time I showed up they gave me...

Sorry to hear of your troubles. This is why I stepped back from a z11 build. Not only were the parts used and abused over the years, the...

Thursday 3

Sorry to hear that talk about a kick in the jimmy!

This is coming completely from left field but here goes. Would it be feasible financially to have that severely damaged head taken to a...

I just got back from speaking with Nathan at Horsepower by Gerolamy. The better of the two heads has two cracks on one cylinder face...

I have 6 409's and use the original canister on every one of them and same amount of mess with a spin in and seems like there is more...

Original is no harder to change and you won't get leaks like many adaptors

The pro mod they had was run by Don with Earl Wade. Got to talk to them at eithe the Grove or Joliet. The were all over that car lke...