Monkeywrench
Member
I’m sure I’m younger then most on here but I got nothing but respect for you guys. I have a few parts u guys maybe looking for
That’s a cool engine for sure!!! Neat to see those pistons. If you haven’t already you should get all the casting #s, and date codes and suffix code rounded up, interested folks will want those. I am assuming that by looking at your picture that this engine hasn’t been “checked” out as far as cracks etc. So that will be a factor in considering the value.60 348 335hp engine almost everything but carbs. I believe would make a real good engine to rebuild. I have a idea what’s it worth but not sure.
Tell the machine shop that you are wanting to sell it and that you want to know of any problem areas so that you can represent it as it is. Take as much guess out of it for the buyer and you can usually get more $.It will need to be disassembled so if you are comfortable with that then do that. Take everything to him, who knows you might have good pistons, crank and so forth. You definitely have a rare engine and I hope it checks out good!Block T0323FH 5011 dated C1660
Heads 1147s B260 and B1960
Intake 9943 D1816
I have a distributor but sure the date is correct 1110919 9E18
exhaust 2793 2794
So I just need to have block pressure checked and heads checked for cracks also cylinder wear
just an observation on the suffix code,,,IMHO the H looks like it may have been added after the fact , but I have never seen one so I am just saying. Don’t want to cause you a problem but it may come up.