'64 2-Dr HT Front Bench Seat vs '62

62BillT

62BillT

Well Known Member
Looking to verify, if installing a set of '61-'62 Front Bench Seat Tracks and Trim on a '64 Seat that this would convert it to a factory original '62 Seat? (Other than the upholstery design). Also if the '62 Upholstery Kit would fit with no problem.

Thanks
 
pvs409

pvs409

Well Known Member
Supporting Member 11
To my knowledge all 61 to 64 Impala 2 door hardtop and convertible front bench seat frames are the same.

The difference in seat tracks is that the 63-64 seat control on the drivers side does not operate through a vertical slot in the aluminum trim. 61-62 seat controls on the drivers side use a slotted vertical hole in the aluminum trim.
The other 3 pieces of aluminum trim ( 2 vertical and the passenger side lower trim) for the seat are the same on 1961 to 1964 impala bench seat 2 door hardtop and convertible.
Paul
 
You must log in or register to reply here.
Top