60 impala, looking to install a 348 tri power.

[Troy tag]

Been working on this money pit for 8 yrs now. 90/ done. Has a sbc that's tired. Going to install a348 tri power
I'll try and load up some pics. I need info on the tri carb set up. I've got the basics. Intake,carbs. Need all the linkage,fuel lines,and carbs gone thru. Im willing to do most of it if I can access the right info.

 

[tripower]

Do you have true end carbs or are you converting center carbs? Vintage Speed has the end carb bases if you are converting and can rebuild the your original bases if that is what you need. They also have the linkage.

 

[61BUBBLE348]

I am new to this,
I put a tri power set up in my 61, bought the rebuilt carbs and linkage (progressive) from Show Cars, although I thought they were a little expensive, bolted them on straight out of the box, so far done over 2000 miles trouble free, just about ready to put on the dyno for fine tuning.
Make sure the outer 2 carbs fully close at idle.

The linkage setup is OK, not great, but works.