409 2 4 barrel carbs set up

Red 409 63 impala

Well Known Member
This 2 carb was original to a rebuilt engine I bought about 10 years back. I am converting the car to a single carb and a 700R4 auto. The manifold is a 3814881 the rebuilder installed the oil shield with small Allen screws to make it removable if needed. It is in very nice condition. The carbs were rebuilt about 15 years ago, but the engine set in a heated garage for 5 years then I bought it. I installed the over 10 years and had it on the road for about 300 miles. The carbs are a 3362S date AF2 and a 3361 AG2 date code. They are very nice carbs and ran well. All original the only thing I did was replace the thermal spring in the auto choke housing. The fuel lines..pump to carb and between the carbs. All linkage, springs, and.return springs and bracket. All this is as I removed it from the engine. The air cleaner is a 63 vintage as the person I purchased the engine was going to install it in a 63. Selling everything for 1800 dollars. I would like the buyer to pick it up. i would ship it but that would be costly with todays shipping costs. Any info feel free to call me 6073455471 I live in Central NY, between Binghamton and Syracuse
 

Attachments

  • IMG_0261.jpeg
    IMG_0261.jpeg
    90.7 KB · Views: 84
  • IMG_0263.jpeg
    IMG_0263.jpeg
    93.8 KB · Views: 75
  • IMG_1290.jpeg
    IMG_1290.jpeg
    72.9 KB · Views: 4
  • IMG_1291.jpeg
    IMG_1291.jpeg
    77.3 KB · Views: 4
  • IMG_1293.jpeg
    IMG_1293.jpeg
    65.5 KB · Views: 5
  • IMG_1296.jpeg
    IMG_1296.jpeg
    74.7 KB · Views: 5
  • IMG_1297.jpeg
    IMG_1297.jpeg
    78.7 KB · Views: 5
  • IMG_1298.jpeg
    IMG_1298.jpeg
    89.4 KB · Views: 5
  • IMG_1300.jpeg
    IMG_1300.jpeg
    93.1 KB · Views: 4
  • IMG_0436.jpeg
    IMG_0436.jpeg
    103.1 KB · Views: 5
Last edited:

63impalass409

Well Known Member
Supporting Member 2
Might want to put where pick up is from but from your area code looks to be New York? Little bit of a drive for me
 
Top