Turn signal cable disconnected

[Albert8541]

I really need some help. Does anyone have a picture or diagram of where the turn signal cable connects to the turn signal actuator on the tilt steering to a 65 Impala? I installed a new turn signal switch but in the process the turn signal cable got disconnected at the actuator and I can’t figure out where it exactly connects. Any help would be greatly appreciated.

 

[IMBVSUR?]

 

[Albert8541]

Thank you, I have seen those. I have the service manual for 1965 full size and assembly manual for 65 Impala but none show where the turn signal cable connects to the turn signal actuator.

 

[327]

 

[La Hot Rods]

Is this a different piece because it has tilt?

 

[Albert8541]

Yes, the tilt steering has the turn signal switch at the bottom of the column on the side and a cable is attached to it. The cable goes up the column and attaches to the turn signal actuator behind the steering wheel

 

[Albert8541]

Thank you

 

[La Hot Rods]

That sounds similar to a 62. they used a cable even on the non tilt.

 

[327]

YES