As my 63 convertible is gone I will be selling all the 409 parts I have accumulated over the past few years. Attached is a bill for hot tanking and magnafluxing the block and heads. I have a lot of pictures of everything so if you want more information just let me know.
Car block
340 HP heads 3830817 and also have a cracked set I will throw in
Stock Crank
Crank bought from Jason Starley ground .20
Pistons and rods bought from Jason (yes I know only 7 in the pic, last one in different box) also have main bearings for .20 turned crank
Also have flywheel 3973466N and bell housing 3779552 bought from Paul Stensland.
Have a 340HP intake bought from Jack Gibbs
Dual quad intake and carbs bought from Dave Coots
3 sets head gaskets, new Pertronix HEI distributor, old point distributor
Vintage set Offy valve covers
Misc stock rockers, timing cover and a not so pretty oil pan
And last but not least 409 shroud bought from Phil Reed.
Prolly a few more odds and ends but this is the bulk of it.
Thinking I would like to get $7500 for the whole works.
Car block
340 HP heads 3830817 and also have a cracked set I will throw in
Stock Crank
Crank bought from Jason Starley ground .20
Pistons and rods bought from Jason (yes I know only 7 in the pic, last one in different box) also have main bearings for .20 turned crank
Also have flywheel 3973466N and bell housing 3779552 bought from Paul Stensland.
Have a 340HP intake bought from Jack Gibbs
Dual quad intake and carbs bought from Dave Coots
3 sets head gaskets, new Pertronix HEI distributor, old point distributor
Vintage set Offy valve covers
Misc stock rockers, timing cover and a not so pretty oil pan
And last but not least 409 shroud bought from Phil Reed.
Prolly a few more odds and ends but this is the bulk of it.
Thinking I would like to get $7500 for the whole works.
