Impala62

Close inspection of the under side of the 62 reveals rust in the rockers. Structurally compromised to the point high hp is not an option...

How did you determine the coolant was passing through the radiator too fast to cool it down?

What temperature does it go to and when? My GS 455 would go 210-215 idling in hot weather but never actually overheated. Could it be as...

Include it please.

Your website? What would a rotating assembly cost me that’s ready to install? I’m on somewhat of a budget but am flexible. I could send...

Murphdog, Do you balance these yourself? Are you saying you can supply the crank and rods or just the balancing? Would these pistons be...

That’s why I can’t give up on the stroker. There really is no substitute for cubic inches. What you mentioned above is the type of thing...

Thanks Don. I’m in way over my head on this. Wondering now if I should stay with the stock crank but by the time I buy new rods and...

What jim said. The thermostat determines how fast the water flows and the shroud and clutch fan cools the coolant. Too loose a clutch...

After much thought I have decided to build this car for me instead of selling it and starting another project. That being said I have...

For someone who restores cars but leaves the engine building to the professionals this is getting confusing. Th Scat web site is really...

Is there a preferred Kit for the 409? I see a 472 ci kit. Seems kinda large. Thanks Phil

That would be a Scat kit?

I’m not sure if I’m in the right place to ask this but here I go. Aluminum heads are not in the budget now but would be in the future...

Thanks Don. I’ll discuss this with the machine shop and go with 2.07 valves if there is any risk of further damage. I guess there is no...