Wilson Header Mfg.

[BSL409]

Had a pair of these 2” made up by ACP last year thinking i might make a set of headers for the new frnt end on the car but made my old set work instead! Welding quality is like the old Stahls, Silicone bronze welded! When i ordered these I complained that they didn’t list the 409 stuff in there on line catalog snd he acted surprised that they weren’t listed! Said he would fix that but i see he didn’t! He was nice to talk to!View attachment 140258

Model #121 58-64 Chevy 348-409
Fully Assembled Stepped Primaries
1 3/4" - 1 7/8"
1 7/8" - 2"
$1764.00 With Slip-On Collectors
Weld-On Collectors $1964.00
Partially Assembled $1464.00

#121 Specs

• Power steering = OK
• power brakes = OK
• Cylinders #7 and #8 go through fenderwell and wrap back under frame to collectors.

A fenderwell version of this header is also available for $1764.00 in the same diameters as the chassis version

 

[Barry Taylor]

Thanks Brian! Forgot they listed them in the small block chevy section!

 

[Iowa 409 Guy]

https://www.summitracing.com/parts/hok-2171-1hkr?rrec=true#overview I believe these are not bad

I put a set of those on the car in 1993 and wore them out.....fit good. Were around 400 bucks then.

 

[Jim Sullivan]

ACP lists the 409 headers under their small block Chevy listings.

 

[yam760]

I just got mine yesterdayView attachment 60666View attachment 60667

man! they are sexy!

 

[yam760]

damn I could of bought a set of these Wilson headers of a bloke in Western Australia last week I was apprehensive as they had been cut from the header plate with 10mm removed off the the primaries for RHD steering shaft, I was concerned how many mods were going to be required to clear bellhousing & angle to floor as they were already having trouble clearing control arm shafts & other chassis component areas, great looking headers & would've been ideal for the project I'm doing, these maybe early ones just looking at the collector ends